LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 105 (Engine System (Assembly - Service Information - TDI 3.0L - CPNB)) >> Engine Assembly >> SUBFRAME Mount >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Vehicles With DSG Transmission 0BZ >> Removing

Transmission Mount, Removing And Installing, Vehicles With DSG Transmission 0BZ: Removing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA34-10649Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, VEHICLES WITH DSG TRANSMISSION .

-- Remove the bolt -1- and lower -2- for the transmission mount.

-- Remove the nut -5- and the bolt -6- and remove the transmission mount -3- from the transmission support -4-.