Torque Bracket
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Lock Carrier
- Transverse Beam
- Nut
- 40 Nm
- Stop
- For torque bracket
- Bolt
- 30 Nm
- Adjusting Buffer
- For torque bracket
- Torque Bracket
- Removing and installing. Refer to TORQUE SUPPORT, REMOVING AND INSTALLING .
- Bolt
- 20 Nm + 90°
- Always replace