Special Tools
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Pry Lever :80-200
- Socket T30 :T10405
- Clutch Module Assembly Aid :T40169
for vehicles with a DSG transmission 0B5
- Clutch Module Transportation Lock :T40170
- Wrench - 21mm :T40263
- Crankshaft Turning Tool :T40272
- Torque Wrench 1332 Insert - Ring Wrench - 16mm :VAG1332/14
- Engine And Transmission Holder :VAS6095
with Engine/Transmission Holder - V8 Engine Bracket : VAS6095/1-13
- Shop Crane :VAS6100
- Lift Arm Extension :VAS6101
- Engine Bung Set :VAS6122
- Scissor Lift Table :VAS6131B
with Scissor Lift Table - Audi Set :VAS6131/10
, Scissor Lift Table - A8 Set :VAS6131/11
and Scissor Lift Table - Q7 Set Articulated Joint Support :VAS6131/13-7
- Shop Crane - Drip Tray :VAS6208
- Hose Clip Pliers :VAS6340
- Hose Clip Pliers :VAS6362
- Used Oil Collection and Extraction Unit :SMN372500
- Engine and Gearbox Jack :VAS6931
- Engine Support Bridge :10-222A
- Lifting Tackle :3033
- Hose Clamps - Up To 25 mm :3094