S-Tronic Transmission, Transmission Mount 0B5

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

S-Tronic Transmission, Transmission Mount Exploded View

Fig 1: S-Tronic Transmission, Transmission Mount Exploded View

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) & SPECIFICATIONS . .
Tunnel Crossmember
- Removing and installing. Refer to SUBFRAME MOUNT (0B5) . .
Stop
- For the transmission mount
Transmission Mount
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) . .
Nut
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) . .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) . .
Transmission Support
- Removing and installing. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) . .
Nut
- Tightening specification. Refer to SUBFRAME MOUNT (0B5) . .