Engine Cover, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- In order to prevent causing damage, do not hit the engine cover with your fist or tool.

-- Be sure not to place the engine cover on the oil filler tube.

-- Install the engine cover according to the following directions:

First press on the engine cover using both hands at the rear mounting points -1-.
Then press on the engine cover using both hands at the front mounting points -2-.

NOTE:

Ignore -arrows-