LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 103 (Engine Cooling System (Service Information - TDI 3.0L - CPNB)) >> 19 Cooling System >> Radiator/Coolant Fan >> Fan Shroud, Removing And Installing >> Fan Shroud, Removing And Installing, AUDI A7 >> Installing

Fan Shroud, Removing And Installing, AUDI A7: Installing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

-- Connect the coolant hose to the coupling. Refer to  23.

-- Install the end plate and the lock carrier cover. Refer to FRONT BUMPER .

scientia non olet · About LEMON Manuals