Overview - Fan Shroud And Radiator Fan
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
There is a risk of injury if the radiator fan turns on by itself.
- Disconnect the connectors before working near the fan shroud.
- Coolant Fan 2 -V177-
- With Coolant Fan Control Module 2 -J671-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING
- Coolant Fan -V7-
- With Coolant Fan Control Module -J293-
- Removing and installing. Refer to Coolant Fan -V7-, REMOVING AND INSTALLING .
- Fan Shroud
- Removing and installing:
- S6/RS6/RS7 together with the radiator. Refer to RADIATOR, REMOVING AND INSTALLING, AUDI S6/S7 .
- S7. Refer to FAN SHROUD, REMOVING AND INSTALLING .
- Removing and installing:
- Bolt
- 3.5 Nm
- Air Guide
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Fan Wheel
- The bolt must lock into the hole.
- Bolt
- 5 Nm
- Air Guide
- Bolt
- 3.5 Nm