Fan Shroud, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the wires. Refer to RELAY CARRIERS, FUSE PANELS AND E-BOXES , and refer to the appropriate WIRING DIAGRAM.

-- Install the air guides. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Install the front bumper cover. Refer to FRONT BUMPER . .

-- Connect the coolant hose to the coupling. Refer to Figure.

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to FILLING .