Right Auxiliary Cooler, Removing And Installing, AUDI RS6/RS7: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front right wheel spoiler. Refer to WHEEL HOUSING LINER . .

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

Audi RS6

-- Remove the right headlamp. Refer to Headlamps . .

Audi RS7

Courtesy of AUDI OF AMERICA, LLC

-- Remove the front bumper cover. Refer to FRONT BUMPER . .

-- Open the retaining tabs in direction of -arrows-, remove the air duct -1- from the front.

-- Remove the nut -arrow- and free up the coolant line -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -3-.

Courtesy of AUDI OF AMERICA, LLC

-- If the auxiliary cooler is replaced, remove bolt -4- and bracket -2-.

-- Place the :VAS6208 underneath.

-- Remove the coolant hoses, to do so, loosen the hose clamps -arrows-.

-- Remove the right auxiliary cooler.