Overview - Electrical Coolant Pump, AUDI S6/S7 [CEUC, CRDB, CEUD, CWUB, CTGE]
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 1.5 Nm
- Spacer Sleeve
- Grommet
- Bracket
- For After-Run Coolant Pump -V51-
- After-Run Coolant Pump -V51-
- Removing and installing. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Bracket
- Nut
- 9 Nm
- Nut
- 9 Nm
- Bolt
- 9 Nm
- Retaining Bracket
- Nut
- 9 Nm
- Charge Air Cooling Pump -V188-
- Removing and installing. Refer to Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING .
- After-Run Coolant Pump -V51-
- Removing and installing. Refer to After-Run Coolant Pump -V51-, REMOVING AND INSTALLING .
- Bolt
- 1.5 Nm
- Spacer Sleeve
- Grommet
- Bracket
- Nut
- 9 Nm
- Retaining Bracket
- Charge Air Cooling Pump -V188-
- Removing and installing. Refer to Charge Air Cooling Pump -V188-, REMOVING AND INSTALLING .
- Coolant Pipe
- Nut
- 9 Nm
- Nut
- 9 Nm
- Coolant Pipe