Overview - Coolant Pump/Thermostat
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Housing
- For the coolant pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Coolant Connection
- O-Ring
- Always replace
- Bolt
- Steel bolt: 9 Nm
- Aluminum bolt: 8 Nm + 90°
- Always replace
- O-Ring
- Always replace
- Bolt
- 9 Nm
- Coolant Connection
- O-Ring
- Always replace
- Intermediate Pipe
- O-Ring
- Always replace
- Bolt
- 5 Nm + 90°
- Always replace
- Coolant Shut-Off Valve
- Removing and installing. Refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
- O-Ring
- Always replace
- Coolant Connection
- Bolt
- 9 Nm
- Coolant Connection
- Seal
- Always replace
- Bolt
- 9 Nm
- Coolant Hose
- O-Ring
- Always replace
- Input Shaft
- For the coolant pump
- O-Ring
- Always replace
- Coolant Pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- Seal
- Always replace
- Seal
- Always replace
- Map Controlled Engine Cooling Thermostat -F265-
- Removing and installing. Refer to Map Controlled Engine Cooling Thermostat -F265-, REMOVING AND INSTALLING .
- Thermostat opening data. Refer to COOLANT THERMOSTAT, CHECKING
- Bolt
- 9 Nm