Transmission Fluid Cooling Valve -N509-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear noise insulation. Refer to NOISE INSULATION . .
-- Remove the bolts -arrows- and remove the heat shield -3-.
-- Disconnect the connector -1-.
-- Loosen the hose clamps -2- to clamp off the coolant hoses with the :3094 and remove them.
-- Remove the Transmission Fluid Cooling Valve -N509-.