LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 102 (Engine Cooling System (Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Right Coolant Pipe, Removing And Installing >> Installing

Right Coolant Pipe, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the O-ring.

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

-- Install the charge air cooler housing. Refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals