LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Engine Assembly- CYNB) >> Engine Assembly >> Assembly Mounts >> Transmission Mount, Removing And Installing >> Transmission Mount, Removing And Installing, Manual Transmission >> Installing

Transmission Mount, Removing And Installing, Manual Transmission: Installing

WARNING: This page is about a different variant/trim than selected.

-- Place the transmission support -3- on the transmission mount -5- and tighten the nut -4- hand tight.

-- Tighten the lower stop -2- with the bolts -1-.

-- Tighten the nut -4-.

-- Install the transmission support with the transmission mount. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING .