Automatic Transmission 0BK Transmission Mount
WARNING: This page is about a different variant/trim than selected.
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Tunnel Crossmember
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Stop
- For the transmission mount
- Transmission Mount
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Nut
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Transmission Support
- There are different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to TRANSMISSION SUPPORT WITH TRANSMISSION MOUNT, REMOVING AND INSTALLING, DSG TRANSMISSION 0B5/AUTOMATIC TRANSMISSION 0BK .
- Bolt
- Only remove when the transmission mount must be separated from the transmission support
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .
- Nut
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0CK] .