Overview - Radiator/Coolant Fan: Notes
WARNING: This page is about a different variant/trim than selected.
- Air Guide
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure
- O-ring
- Always replace
- Radiator
- Removing and installing. Refer to RADIATOR, REMOVING AND INSTALLING .
- After replacing, replace entire amount of coolant
- Coolant Hose
- Lift the retaining clamp to remove
- Connecting. Refer to Figure
- O-ring
- Always replace
- Coolant line
- To the coolant reservoir
- To remove, press the release ring
- Connecting. Refer to Figure
- O-ring
- Always replace
- Rubber Bushing
- For the radiator
- Retaining Pin
- Disengage and remove using screwdriver
- Air Guide
- Bolt
- 2.5 Nm
- Condenser
- Removing and installing. Refer to CONDENSER, REMOVING AND INSTALLING .
- Air Guide
- Rubber Bushing
- For the radiator
- Radiator Bracket
- Bolt
- 5 Nm
- Backing Plate
- Bolt
- 4.5 Nm