Engine Coolant Temperature Sensor On Radiator Outlet -G83-, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
- The engine is cold.
-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.
-- Remove the front noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Disconnect the connector -1- from the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.
NOTE:
Use A Cloth To Catch Any Leaking Coolant.
Insert the new Engine Coolant Temperature Sensor on Radiator Outlet -G83- immediately in the connection to prevent coolant loss.
-- Open the clamp -2- and remove the Engine Coolant Temperature Sensor on Radiator Outlet -G83-.