After-Run Coolant Pump -V51-, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Remove The Front Noise Insulation. Refer to FRONT NOISE INSULATION, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Place a cloth underneath to catch any escaping coolant.

-- Loosen the hose clamps -2-, then clamp off the coolant hoses with the :3094 and remove them.

-- Remove the bolts -1- and the After-Run Coolant Pump -V51-.