Coolant Pipes On Engine
WARNING: This page is about a different variant/trim than selected.
- Coolant Hose
- Bolt
- 9 Nm
- Left Coolant Pipe
- Removing and installing. Refer to LEFT COOLANT PIPE, REMOVING AND INSTALLING
- Coolant Hose
- Bolt
- 20 Nm
- Bolt
- 9 Nm
- Bolt
- 20 Nm
- Right Coolant Pipe
- With check valve
- Removing and installing. Refer to RIGHT COOLANT PIPE, REMOVING AND INSTALLING
- O-ring
- Always replace after removing
- Coolant Hose
- O-ring
- Always replace after removing
- Bolt
- 6 Nm
- Self-tapping
- Position the bolt by hand and tighten it until it finds the old threads. Then tighten the bolt to the specification.
- Coolant Hose