SUBFRAME Coolant Pipe, Removing And Installing: Removing
WARNING: This page is about a different variant/trim than selected.
-- Support the engine in its installed position. Refer to ENGINE, SUPPORTING IN INSTALLED POSITION .
-- Remove the noise insulations. Refer to NOISE INSULATION, REMOVING AND INSTALLING .
-- Remove the left front wheel spoiler. Refer to FRONT WHEEL SPOILER, REMOVING AND INSTALLING .
-- Remove the engine mount bolts -arrows-.
NOTE:
Ignore items -1 and 2-.
-- Move the engine mount retaining plate to the side.
-- Clamp off and remove the coolant hoses with the :3094 by loosening the hose clamps -arrows-.
-- Remove the bolts -1 and 2- and remove the coolant pipe.