LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> SUBFRAME Coolant Pipe, Removing And Installing >> Installing

SUBFRAME Coolant Pipe, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

Do not reuse used coolant.

-- Fill the coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals