LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Engine Cooling System (Service Information - CYNB - 1 Of 2)) >> 19 Cooling System >> Coolant Pipes >> Coolant Pipes, Removing And Installing >> Coolant Pipe On The Transmission, Removing And Installing >> Installing

Coolant Pipe On The Transmission, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

Secure all hose connections with hose clamps of the same type as those equipped by the factory.

Do not reuse used coolant.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Install The Engine Cover. Refer to the appropriate service information; ENGINE COVER, REMOVING AND INSTALLING [CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA ENGINES] , ENGINE COVER, REMOVING AND INSTALLING [CLAB, CLAA, CDUC, CGQB, CKVB, CKVC, CDUD, CPNB, CTCB, CTCC, CVUA, CVUB ENGINES] .

scientia non olet · About LEMON Manuals