Engine, Securing To Engine And Transmission Holder: Vas6095A: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Engine Sling :2024A
- Holding Fixture :VW540
- Shop Crane :VAS6100
- Engine and Transmission Holder :VAS6095A
- Engine engaged with the :2024A on the :VAS6100
- To be aligned to the center of gravity of the assembly, the rails with holes of the lifting hooks must be inserted as shown.
CAUTION:
There Is A Risk Of Injury From The Lifted Engine Falling.
Parts Of The Body Could Be Crushed.
- Secure the mounting hooks and pins on the lifting tackle with a securing pin.