Overview - Solenoid Coupling: Notes

Fig 1: Solenoid Coupling Exploded View

Courtesy of AUDI OF AMERICA, LLC

Belt Pulley
- For the supercharger
- Removing and installing. Refer to SUPERCHARGER BELT PULLEY, REMOVING AND INSTALLING .
Bolt
- 20 Nm + 90°
- Replace after removing
Solenoid Coupling
- Removing and installing. Refer to SOLENOID COUPLING, REMOVING AND INSTALLING .
Bolt
- 20 Nm
Drive Plate
- Replace only together with -3-
- Do not loosen the bolted connections on the drive plate
- Replace the drive plate if the bolted connections are loosened
- Removing and installing. Refer to SOLENOID COUPLING, REMOVING AND INSTALLING .
- Clean the friction lining and friction surface before installing with brake cleaner
- Tightening specification for the clamping screw. Refer to appropriate service information.
Bolt
- 3.6 Nm
Woodruff Key
Supercharger
O-ring
- Replace after removing
Trim