LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Quattro Competition >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Supercharger System (Service Information - CREC, CREH) >> 21 Turbocharger, Supercharger >> Charge Air System >> Charge Air Pressure Sensor - G31- / -G447-, Removing And Installing >> Installing

Charge Air Pressure Sensor - G31- / -G447-, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

NOTE:

Replace the self-locking screws and O-ring after removal.

Clean the threaded holes for the charge air pressure sensor inside the supercharger housing with a thread tap before assembling.

-- Install the supercharger. Refer to SUPERCHARGER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals