Transmission, Transporting
Special Tools And Workshop Equipment Required
- Shop Crane :VAS6100
- Lifting Tackle :3033
- Hook And Support Tool :3311 with Hook And Support Tool - Bolt :3311/1
- Retaining Strap :T40155
CAUTION:
Risk of damaging the transmission by mixing ATF and transmission fluid (MTF) through the same bleeder.
- The transmission is filled with ATF and MTF transmission fluid, the transmission can only be tilted a maximum of 15° in lateral and longitudinal direction.
- If more of an incline is needed, then the ATF and MTF transmission fluids must be drained.
- Draining the ATF. Refer to ATF, DRAINING AND FILLING .
- Draining The Transmission Fluid. Refer to TRANSMISSION FLUID, DRAINING AND FILLING [FOR ENGINE(S) CYNB, CPNB] .
-- Secure the transmission on the :3311 (use new longer bolts :3311/1 ).
-- Guide the :T40155 around the transmission and secure on the :3033 .
-- Secure the :T40155 on the transmission end with a commercially available M10 bolt -arrow-.
-- Using the :3033 and the :VAS6100 the transmission can be lifted and transported.