Wheel Set Tightening Sequence (Transmission) And Specifications

Fig 1: Wheel Set Tightening Sequence (Transmission)

Courtesy of AUDI OF AMERICA, LLC

-- Push the centering bracket -A- all the way in.

NOTE:

Bolt -6- Without Centering Bracket.

-- Tighten The Bolts In Two Steps In The Sequence Shown:

Step	Bolts	Tightening Specification
1.	-1 to 6-	Install by hand evenly until the bolt head contact the transmission housing.
2.	-1 to 6-	Tighten one after the other to 15 Nm + 90°