Transmission Fluid Auxiliary Hydraulic Pump -V552-, Removing And Installing: Removing
-- Remove the Mechatronic. Refer to MECHATRONIC, REMOVING AND INSTALLING .
-- Remove the Transmission Control Module -J217-. Refer to Transmission Control Module -J217-, REMOVING AND INSTALLING .
-- Secure the Mechatronic on the vise as shown using the :T40321 .
-- Remove the bolts -arrows-.
-- Remove the ATF motor -1- with the ATF pump -2- downward at the same time pay attention that the ATF pump -2- does not fall down.