Solenoid Valves And Pressure Regulating Valves In Valve Body, Removing And Installing: Removing

• Check before the repair, if the necessary replacement parts are available.

NOTE:

Do Not Remove The Clutch Piston Valve -Arrow- It Remains In The Valve Body.

Courtesy of AUDI OF AMERICA, LLC

The Height Of The Accurate Fit Prevents Reinstalling And The Valve Body Is Damaged At The Same Time.

-- Remove the Mechatronic. Refer to MECHATRONIC, REMOVING AND INSTALLING .

-- Remove the Transmission Control Module -J217-. Refer to Transmission Control Module -J217-, REMOVING AND INSTALLING .

-- Remove bolts -arrows- and remove the contact element.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Hold The Solenoid Valve 5 -N92- -1- When Removing The Mounting Rail.

Courtesy of AUDI OF AMERICA, LLC

The clutch cooling valve -2- and the spring -3- must remain in the valve body.

-- Remove the bolts -arrows- and remove the mounting rail.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the valves if necessary carefully pry out as shown in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC