Solenoid Valves And Pressure Regulating Valves In Valve Body, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Electronic Torque Wrench 3-60Nm :VAS6583
- Cover :T40322/1-4
- Support :T40321
- Ruler (2 pc.) :T40100
NOTE:
Check Before The Repair, If The Necessary Replacement Parts Are Available.
WARNING:
The System Is Under Pressure.
- Deactivate the ATF pump and drain the hydraulic pressure reservoir before removing the transmission fluid pan!
- Also refer to ATF PUMP, DEACTIVATING AND DRAINING THE HYDRAULIC PUMP RESERVOIR .
CAUTION:
Contamination Damages The Mechatronic.
- Pay attention to absolute cleanliness when working on hydraulic control.
- Even a small amount of debris can lead to system malfunctions.
- Remove the replacement parts from their packaging just prior to installing them.
- Protect open oil channels from debris.
NOTE:
Electric Allocation Of The Pressure Regulating Valves And Solenoid Valves. Refer to TRANSMISSION CONTROL .