Overview - MECHATRONIC: Notes

Fig 1: Exploded View Of Mechatronic (0CK, 0CJA, 0CLA, 0DN & 0DPA)

Courtesy of AUDI OF AMERICA, LLC

Transmission Fluid Pan
- Removing and installing. Refer to TRANSMISSION FLUID PAN, REMOVING AND INSTALLING .
Bolt
- Replace after removing.
- Tightening specification and sequence. Refer to Figure.
- M6 X 30
Seal
- Replace after removing.
Bolt
- Replace after removing.
- Tightening specification and sequence. Refer to Figure.
Bracket
Hydraulic Pressure Sensor 1 -G545- and Hydraulic Pressure Sensor 2 -G546-
- Removing and installing. Refer to Hydraulic Pressure Sensor 1 -G545- AND Hydraulic Pressure Sensor 2 -G546-, REMOVING AND INSTALLING .
Seals
- Replace after removing.
Contact Element
Bolt
- 3 Nm + 90°
- Replacing
- M6 X 25
O-ring
- Replace after removing.
Bleed Pipe
Dust Ring
Seals
- Replace after removing.
Seal
- Replace after removing.
- Depending on the model
- For vehicles with Parking Lock Solenoid -N486-
Mechatronic
- Removing an installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
Mechatronic Bolts
- Refer to Figure
- M6 X 90
Bolt
- 3 Nm + 90°
- Replace after removing.
- For vehicles with Parking Lock Solenoid -N486-
- M6 X 22
Seal
- Replace after removing.
Transmission Control Module -J217-
Oil Pipe
- Depending on the model
- Foe vehicles with Parking Lock Solenoid -N486-
Wiring Guide
- Replace after removing.
Seals
- Replace after removing.
ATF Pipe
- Replace after removing.
Seals
- Replace after removing.