MECHATRONIC, Removing And Installing: Installing: Procedure

-- Connect the Vehicle Diagnostic Tester.

-- Select Diagnostic  mode and start the diagnostic.

-- Select the Test plan  tab.

-- Select individual test  button and select the following tree structure one after the other:

• Drivetrain
• 7-Speed Dual Clutch Transmission 0CK/0CL
• 01 - OBD-capable systems
• 02 - Transmission electronics 0CK
• 02 - Transmission electronics, functions

-- Checking The ATF Level. Refer to ATF LEVEL, CHECKING .

-- Install The Subframe Crossbrace. Refer to SUBFRAME CROSSBRACE, REMOVING AND INSTALLING .

-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .