Rules For Cleanliness When Working On DSG® Transmission
- Thoroughly clean the connection points and the surrounding area before loosening.
- Clean the transmission and transmission components using Cleaning Solution -D 009 401 04-.
- Use lint-free cloths for cleaning, for example, the "WYPALL X70/WORKHORSE" cloth made by Kimberly-Clark Professional.
- Seal all open lines and connections immediately with clean plugs or caps from the :VAS6122 .
- Place the removed parts on a clean surface and cover them. Use foil or lint-free cloths.
- Carefully cover or seal opened components if the repair will not be done immediately.
- Only install clean parts: Remove the replacement parts from their packaging just before installing them.
- Protect the disconnected connectors from dirt and moisture and only connect when they are dry.