Checking Valve Timing - with Marks on the Cylinder Head Cover

Courtesy of AUDI OF AMERICA, LLC

TIP: 

The combination of the shown :T40263  , : T40314  and 24 mm socket are better suited than the :T10355  for positioning the vibration damper.

-- Turn the vibration damper in the "TDC" position.

• The notch on the vibration damper must align with the arrow marking on the lower timing chain cover -arrow-.
• The markings -1- on the camshaft chain sprockets must be opposite the markings -2 and 3- on the cylinder head cover.