Without Marks in the Cylinder Head Cover

Courtesy of AUDI OF AMERICA, LLC

• The notch on the vibration damper and the marking on the lower cover for timing chain must be opposite one another -arrow-.
• The markings -1- on the camshaft chain sprockets must point upward.

-- Measure the distance from the edge -1- to the marking -2- on the exhaust camshaft chain sprocket.

Courtesy of AUDI OF AMERICA, LLC

• Specified value: 74 to 77 mm.

-- Once the specified value is reached, measure the distance between the mark on the exhaust camshaft chain sprocket -3- and the mark on the intake camshaft chain sprocket -4-.

Courtesy of AUDI OF AMERICA, LLC

• Specified value: 124 to 127 mm.