LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A6 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Cylinder Head, VALVETRAIN- CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Notes

Overview - Camshaft Timing Chains: Notes

Fig 1: Camshaft Timing Chains Exploded View
GWWA15-11799Courtesy of AUDI OF AMERICA, LLC
  1. Bolt
    • 4 Nm + 90°
    • Always replace after removing.
  2. Chain Tensioner
    • Is under tension
    • Secure using :T40267  before removing
  3. Timing Chain Tensioning Rail
  4. Guide Pin
    • 20 Nm
  5. Bolt
    • Tightening sequence. Refer to Figure.
    • Always replace after removing.
  6. Adapter Sleeve
    • Depending on the version, not present on every bearing bracket
  7. Control Valves
    • 35 Nm
    • Left-hand thread
    • Different versions depending on the version.
    • Remove from the :T10352A  using a tool
  8. Bearing Bracket
  9. Camshaft Timing Chain Guide Rail
  10. Camshaft Housing
  11. Camshaft Timing Chain
    • Before removing, mark the running direction with paint
    • Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
    • After procedures on the chain drive perform the adaptation using the Vehicle Diagnostic Tester
  12. Camshaft Timing Chain Guide Rail
  13. Guide Pin
    • 20 Nm
  14. Three Stage Chain Sprocket
    • Crankshaft
    • Installation position. Refer to .
scientia non olet · About LEMON Manuals