Bearing Bracket, Removing And Installing: Removing

-- Remove the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

TIP: 

The control valves have left-hand thread.

-- Remove the left and right control valves using the Assembly Tool -1- in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

Depending on the version of the control valve use one of the listed tools:

• :T10352 
• :T10352/1 
• :T10352/2 
• :T10352/3 
• :T10352/4 

-- To do so counterhold on the vibration damper with the :T40263  , :T40314  and a 24 mm Socket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

• Carefully remove the bearing bracket without tilting it.

-- Remove the bearing mount.

-- Remove the plug -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Install the :T40243  on the cylinder head -lower arrows-.

Courtesy of AUDI OF AMERICA, LLC

• The help of a second technician is necessary for the following steps.

-- Press the chain tensioner circlip -1- together and hold it.

-- Slowly press and hold the :T40243  in direction of -arrow-. This will push back the chain tensioner.

TIP: 

The chain tensioner is lubricated with oil and can only be pushed back slowly by applying constant pressure.

-- Lock the chain tensioner with the :T40267  .

Courtesy of AUDI OF AMERICA, LLC

-- Remove the :T40243  .