Bearing Bracket, Removing And Installing: Installing

-- Install the bolts -arrows- and tighten them. Tightening specifications -item 4-  OVERVIEW - CYLINDER HEAD.

Courtesy of AUDI OF AMERICA, LLC

-- Coat the holes -arrows- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

-- Check if the adapter sleeve -1- is installed.

Courtesy of AUDI OF AMERICA, LLC

• Carefully mount the bearing bracket without tilting it.

-- Attach the bearing mount and install the bolts -arrows- all the way by hand.

-- Remove the :T40267  .

-- Tighten the bearing bracket bolts. Refer to Figure.

Installation is performed in reverse order of removal, noting the following: 

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .