Overview - Engine Oil Cooler

Fig 1: Engine Oil Cooler Exploded View

Courtesy of AUDI OF AMERICA, LLC

Sub-Assembly Bracket
- There are different versions. Refer to the appropriate service information for the allocation.
- Removing and installing. Refer to SUB-ASSEMBLY BRACKET, REMOVING AND INSTALLING .
Seal
- Always replace after removing.
O-Rings
- Always replace after removing.
- Coat with engine oil
Mechanical Switch Valve
- Replacing. Refer to MECHANICAL SWITCH VALVE, REMOVING AND INSTALLING .
Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
- See note. Refer to OVERVIEW - OIL PAN/OIL PUMP, VERSION 1 .
Seal
- Always replace after removing.
- Coat with coolant
Connection
Bolt
- 8 Nm + 45°
- Always replace after removing.