LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A4 Prestige >> Repair and Diagnosis >> Engine Mechanical >> Lubrication System >> Lubrication [CYMC, CYRB, CYRC, CWPB, DAXB, DAXC, CJEB, CJED, CJEE, CNCD, CNCE, CUHA, CUJA, CNCB, CUHB, DAYB, CYGA, CYNB, CYPA, CYPB, CYYA, CVJA, DDWA, DJYA, DKWA, DNTA, DKNA, DLHA, DLHB, DMFA, DKWB, DLGA] >> 17 Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.

Fig 1: Locating Oil Separator Bolts
GWWA17-10827Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and remove the crankcase ventilation hose -3- from oil separator. Release the catches to do so if necessary.

-- Remove the bolts -arrows- and the oil separator.

scientia non olet · About LEMON Manuals