Carbon-Ceramic Brake Wear Tester: Vas6813, Checking
"Before" measuring, the Carbon-Ceramic Brake Wear Tester:VAS6813 must be checked using the measurement plate provided.
MEASUREMENT PLATE:
-- Place the measuring device in both openings of the measurement plate, -arrows- so that the laser beam points under the mark with the attached reference value.
-- Switch On The Measuring Device.
The value displayed on the display must correspond to the reference value attached to the measurement plate.
TIP:
- If the difference to the reference value is more than ± 2.0 units the measuring device must be calibrated by a specialist company.
- For more information refer to the supplied Owner's Manual.