Left And Right Parking Brake Motor -V282- / -V283-, Removing And Installing: Removing

-- Release The Parking Brake.

-- Switch off the ignition.

-- Remove the rear wheel. Refer to WHEEL, CHANGING AND MOUNTING / WHEEL BOLT TIGHTENING SPECIFICATIONS .

-- Disconnect the connector -3- for the parking brake motor.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Open the clip -2- and free up the brake pad wear indicator wire.

-- Remove the bolts -arrows-.

-- Remove the parking brake motor -1- from the brake caliper.

-- Remove the seal.