Overview - Rear Seat Backrest, Folding Backrest

Courtesy of AUDI OF AMERICA, LLC

1. Release Cable
   • For remote backrest release
2. Nut
   • 9 Nm
3. Side Cushion
   • Removing and installing. Refer to SIDE CUSHION, REMOVING AND INSTALLING .
4. Outer Bearing Sleeve
   • Place in the backrest frame and push until stop.
5. Right Folding Backrest with Center Folding Backrest
   • Removing and installing. Refer to REAR SEAT BACKREST, REMOVING AND INSTALLING, OUTER FOLDING BACKREST .
6. Bolt
   • 8 Nm
7. Securing Bracket
   • For the center bracket
   • Removing and installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
8. Center Support
   • Removing and installing. Refer to CENTER BRACKET, REMOVING AND INSTALLING .
9. Bolt
   • 20 Nm
   • Quantity: 4
10. Mounting Pin
    • 15 Nm
11. Inner Bearing Sleeve