Hinge, Resetting

• To complete the procedure, a second technician is required to be at the following position found here: HINGE, RESETTING .
• After the pedestrian protection has deployed the pedestrian protection trigger must be replaced. Refer to OVERVIEW - PEDESTRIAN PROTECTION / PEDESTRIAN PROTECTION CENTER CRASH SENSOR -G693-, REMOVING AND INSTALLING .

-- Use tape to protect the edges of the hood and the fender at their transition from damage.

-- With the help of a second technician, push the hood hinges -Item  ) OVERVIEW - HOOD - Hinge ack into the original position on the left and right sides at the same time until it engages.