Overview - Vacuum Pump, 2.0L TFSI Engine

Fig 1: Overview - Vacuum Pump, Vehicles With 2.0L TFSI Engine

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Vacuum Pump
- Removing and Installing. Refer to VACUUM PUMP, REMOVING AND INSTALLING, 2.0L TFSI ENGINE .
Seal
- Replace after removing.
Vacuum Hose
Bolt
- 8 Nm +180°
- Replace after removing.
Vacuum Line
- From EVAP Canister Purge Regulator Valve 1 -N80- to EVAP canister
Bolt
- 9 Nm
Bolt
- 9 Nm
Bolt
- Tightening specification. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .
High Pressure Pump
- Removing and Installing. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING [For engine(s) DBPA] .
O-Ring
- Replace after removing.