Brake Fluid Reservoir, Removing And Installing: Installing

• Coat the plugs on the brake fluid reservoir with brake fluid.

-- Insert the brake fluid reservoir into the plugs in the brake master cylinder.

Further installation is performed in reverse order of removal, while noting the following:

-- Fill the brake fluid reservoir up to the "MIN" mark.

Fig 1: Brake Fluid Reservoir

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove all cloths from the vehicle that were previously placed down.

-- Bleed the brake system. Refer to HYDRAULIC SYSTEM, BLEEDING .

-- Install the plenum chamber cover. Refer to BULKHEAD .

-- Check brake fluid level, and fill if necessary.