Vacuum Pump, Removing And Installing, 3.0L TFSI Engine: Installing

Install in reverse order of removal and note the following:

• Replace the seal after removal.
• Check the vacuum lines for damage before assembling and replace if necessary.
• Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Catalog.

-- Position the vacuum pump driver -1- so it engages in the symmetrical groove on the camshaft when positioning -arrows-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the vacuum line with the hose clamp -1- connected.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the lower air duct pipe. Refer to CHARGE AIR SYSTEM [For engine(s) DBPA] .