Noise Insulation, Removing And Installing, Front: Installing

Install in reverse order of removal and Note The Following: 

Vehicles with Parking Heater:

Fig 1: Ensure Exhaust Pipe Is Installed Correctly Inside Noise Insulation

Courtesy of AUDI OF AMERICA, LLC

• The rubber grommet -A- must rest without tension in the noise insulation -B-.
• The exhaust pipe -C- must be flush with the rubber grommet or it can protrude out slightly.
• The exhaust pipe opening must be perpendicular to the noise insulation and must not point in the direction of travel -arrow-.