Backrest Heating Element, Removing And Installing: Procedure

• Cover and cushion separated. Refer to COVER AND CUSHION, SEPARATING, OUTER FOLDING BACKREST .

-- Cut the wire -3- directly at the old heating element.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Align the new heating element -1- on the cushion -2-.

-- Peel the protective film off the heating element. Be careful not to damage the heating element.

-- Glue the heating element so that it aligns with the old heating element and is not wrinkled.

Further installation is the reverse order of removal.