Locking Mechanism Trim, Removing And Installing: Removing
-- Unlock the rear seat backrest.
-- Make sure the button -2- (indicator) is in the >>up<< position.
-- Push the tabs -arrows- on both sides of the trim using a :3409 .
-- Remove the trim -1- upward and off the rear seat backrest -3-.
-- Remove the trim -1- in the front section as far as possible upward from the rear seat backrest.
-- Pry the catch -arrow- in the rear section of the trim out of the locking mechanism using a flat-head screwdriver.
-- Remove the trim upward from the rear seat backrest.